Cisco 300 Series User Manual

Smartport Commands
OL-32830-01 Command Line Interface Reference Guide 848
44
Default Configuration
None
Command Mode
User EXEC mode
Example
switchxxxxxx# show macro auto processing
CDB: enabled
LLDP: enabled
host :disabled
ip_phone :enabled
ip_phone_desktop:enabled
switch :enabled
router :disabled
ap :enabled
44.13 show macro auto smart-macros
The show macro auto smart-macros EXEC mode command displays the name of
Smartport macros, their type (built-in or user-defined) and their parameters. This
information is displayed for all Smartport types or for the specified one.
Syntax
show macro auto smart-macros [
smartport-type ]
Parameters
• smartport-type —Smartport type (range: printer, desktop, guest, server,
host, ip_camera, ip_phone, ip_phone_desktop, switch, router or wireless
access point (ap)).
Default Configuration
None

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48