Cisco 300 Series User Manual

Authentication, Authorization and Accounting (AAA) Commands
105 OL-32830-01 Command Line Interface Reference Guide
3
Example
switchxxxxxx(config)# aaa accounting dot1x start-stop group radius
3.14 show accounting
The show accounting EXEC mode command displays information as to which type
of accounting is enabled on the switch.
Syntax
show accounting
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays information about the accounting status.
Acct-Authentic (45) Ye s Yes Indi cates how the
supplicant was
authenticated.
Acct-Session-Time (46) No Yes Indicates how long the
supplicant was logged
in.
Acct-Terminate-Cause
(49)
No Yes Reports why the
session was
terminated.
Nas-Port-Type (61) Yes Yes Indicates the supplicant
physical port type.
Name Start Stop Description

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48