Cisco 300 Series User Manual

IP System Management Commands
OL-32830-01 Command Line Interface Reference Guide 480
24
Example
The following example displays logging in to IP address 176.213.10.50 via Telnet.
switchxxxxxx> telnet 176.213.10.50
24.3 traceroute
To display the routes that packets will take when traveling to their destination, use
the traceroute EXEC mode command.
Syntax
traceroute ip {
ipv4-address | hostname } [size packet_size ] [ttl max-ttl ] [count
packet_count
] [timeout time_out ] [source ip-address ] [tos tos ]
traceroute ipv6 {
ipv6-address | hostname } [size packet_size ] [ttl max-ttl ] [count
packet_count
] [timeout time_out ] [source ip-address ] [tos tos ]
nntp Network News Transport
Protocol
119
pim-auto-r
p
PIM Auto-RP 496
pop2 Post Office Protocol v2 109
pop3 Post Office Protocol v3 110
smtp Simple Mail Transport
Protocol
25
sunrpc Sun Remote Procedure Call 111
syslog Syslog 514
tacacs TAC Access Control System 49
talk Talk 517
telnet Telnet 23
time Time 37
uucp Unix-to-Unix Copy Program 540
whois Nickname 43
www World Wide Web 80
Keyword Description Port Number

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48