IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide 576
25
other-flag: disabled (default)
router-preference:
minimum: medium (from policy2 attached to the VLAN)
maximum: medium (from policy2 attached to the VLAN)
IPv6 Source Guard Policy:
trusted port:
enabled (from policy1 attached to the port)
25.68 show ipv6 first hop security attached
policies
To display information about the policies attached to the port and to the VLAN, use
the show ipv6 first hop security attached policies command in privileged EXEC
mode.
Syntax
show ipv6 first hop security attached policies interface
interface-id
vlan
vlan-id
Parameters
• interface
interface-id
—Port Identifier (Ethernet port or port channel).
• vlan
vlan-id
—VLAN Identifier.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays policies of all IPv6 First Hop Security attached to a VLAN
specified by the
vlan-id
argument and displays all policies attached to a port and
to VLAN specified by the
interface-id
and
vlan-id
arguments.
Examples
The following example displays the attached policy on gi11 and VLAN 100:
switchxxxxxx#
show ipv6 first hop security attached policies interface
gi11
vlan 100
To Next Page
Loading...
