Cisco 300 Series User Manual

Ethernet Configuration Commands
399 OL-32830-01 Command Line Interface Reference Guide
18
Syntax
port jumbo-frame
no port jumbo-frame
Parameters
This command has no arguments or keywords.
Default Configuration
Jumbo frames are disabled on the device.
Command Mode
Global Configuration mode
User Guidelines
This command takes effect only after resetting the device.
Example
The following example enables jumbo frames on the device.
switchxxxxxx(config)# port jumbo-frame
18.13 clear counters
To clear counters on all or on a specific interface, use the clear counters Privileged
EXEC mode command.
Syntax
clear counters
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or port-channel.
Default Configuration
All counters are cleared.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48