Cisco 300 Series User Manual

Ethernet Configuration Commands
389 OL-32830-01 Command Line Interface Reference Guide
18
18.2 interface range
To execute a command on multiple ports at the same time, use the interface range
command.
Syntax
interface range
interface-id-list
Parameters
interface-id-list—Specify list of interface IDs. The interface ID can be one of the
following types: Ethernet port, VLAN, or port-channel
Default Configuration
None
Command Mode
Interface (Ethernet, Port Channel, VLAN) Configuration mode
User Guidelines
Commands under the interface range context are executed independently on
each interface in the range. If the command returns an error on one of the
interfaces, it does not stop the execution of the command on other interfaces.
Example
switchxxxxxx(config)# interface range gi11-4
switchxxxxxx(config-if-range)#
18.3 shutdown
To disable an interface, use the shutdown Interface Configuration mode command.
To restart a disabled interface, use the no form of this command.
Syntax
shutdown
no shutdown

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48