Cisco 300 Series User Manual

IPv6 Commands
OL-32830-01 Command Line Interface Reference Guide 632
27
ND> 2001::/64 [0/0]
via :: VLAN 100
ND> 2002:1:1:1::/64 [0/0]
via :: VLAN 100
ND> 3001::/64 [0/0]
via :: VLAN 101
ND> 4004::/64 [0/0]
via :: VLAN 110
27.17 show ipv6 route summary
Use the show ipv6 route summary command in User EXEC or Privileged EXEC
mode to display the current contents of the IPv6 routing table in summary format.
Syntax
show ipv6 route summary
Parameters
N/A.
Command Mode
User EXEC mode
Privileged EXEC mode
Example
The following is sample output from the show ipv6 route summary command:
switchxxxxxx# show ipv6 route summary
IPv6 Routing Table Summary - 97 entries
37 local, 35 connected, 25 static
Number of prefixes:
/16: 1, /28: 10, /32: 5, /35: 25, /40: 1, /64: 9
/96: 5, /112: 1, /127: 4, /128: 36

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48