Cisco 300 Series User Manual

DHCP Snooping Commands
OL-32830-01 Command Line Interface Reference Guide 318
13
switchxxxxxx# clear ip dhcp snooping database
13.10 show ip dhcp snooping
Use the show ip dhcp snooping EXEC mode command to display the DHCP
snooping configuration for all interfaces or for a specific interface.
Syntax
show ip dhcp snooping
[interface-id]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
User EXEC mode
Example
The following example displays the DHCP snooping configuration.
switchxxxxxx# show ip dhcp snooping
DHCP snooping is Enabled
DHCP snooping is configured on following VLANs: 21
DHCP snooping database is Enabled
Relay agent Information option 82 is Enabled
Option 82 on untrusted port is allowed
Verification of hwaddr field is Enabled
DHCP snooping file update frequency is configured to: 6666 seconds
Interface
---------
gi11
gi12
Trusted
-------
Yes
Yes

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48