Cisco 300 Series User Manual

GARP VLAN Registration Protocol (GVRP) Commands
OL-32830-01 Command Line Interface Reference Guide 430
20
gi1 2 Enabled Normal Enabled 1200 400 20000
20.7 show gvrp error-statistics
Use the show gvrp error-statistics EXEC mode command to display GVRP error
statistics for all interfaces or for a specific interface.
Syntax
show gvrp error-statistics
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
All GVRP error statistics are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP error statistics.
switchxxxxxx# show gvrp error-statistics
GVRP Error Statistics:
----------------------
Legend:
INVPROT : Invalid Protocol Id
INVATYP : Invalid Attribute Type INVALEN : Invalid Attribute Length
INVAVAL : Invalid Attribute Value INVEVENT: Invalid Event
Port INVPROT INVATYP INVAVAL INVALEN INVEVENT
-------- ------- ------- ------- ------- --------
gi1 1 0 0 0 0 0
gi1 2 0 0 0 0 0

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48