Cisco 300 Series User Manual

DHCP Server Commands
303 OL-32830-01 Command Line Interface Reference Guide
12
switchxxxxxx# show ip dhcp expired
DHCP server enabled
The number of expired entries is 1
IP address Hardware address
172.16.1.11 00a0.9802.32de
172.16.3.254 02c7.f800.0422
switchxxxxxx# show ip dhcp expired 172.16.1.11
DHCP server enabled
The number of expired entries is 1
IP address Hardware address
172.16.1.13 00a0.9802.32de
12.25 show ip dhcp pool host
To display the DHCP pool host configuration, use the show ip dhcp pool host
command in User EXEC mode.
Syntax
show ip dhcp pool host [
address | name ]
Parameters
• address —(Optional) Specifies the client IP address.
• name —(Optional) Specifies the DHCP pool name. (Length: 1-32 characters)
Command Mode
User EXEC mode
Examples
Example 1. The following example displays the configuration of all DHCP host
pools:
switchxxxxxx# show ip dhcp pool host

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48