Cisco 300 Series User Manual

802.1X Commands
83 OL-32830-01 Command Line Interface Reference Guide
2
2.33 show dot1x statistics
Use the show dot1x statistics Privileged EXEC mode command to display 802.1X
statistics for the specified port.
Syntax
show dot1x statistics interface
interface-id
Parameters
• interface-id —Specifies an Ethernet port.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays 802.1X statistics for
gi1 1.
switchxxxxxx# show dot1x statistics interface gi1 1
EapolFramesRx: 11
EapolFramesTx: 12
EapolStartFramesRx: 1
EapolLogoffFramesRx: 1
Port
-------
gi11
gi11
gi12
MAC Address
--------------
0008.3b79.8787
0008.3b89.3128
0008.3b89.3129
Remaining Time
--------------
20
40
10

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48