Cisco 300 Series User Manual

802.1X Commands
OL-32830-01 Command Line Interface Reference Guide 84
2
EapolRespIdFramesRx: 3
EapolRespFramesRx: 6
EapolReqIdFramesTx: 3
EapolReqFramesTx: 6
InvalidEapolFramesRx: 0
EapLengthErrorFramesRx: 0
LastEapolFrameVersion: 1
LastEapolFrameSource: 00:08:78:32:98:78
The following table describes the significant fields shown in the display:
Field Description
EapolFramesRx Number of valid EAPOL frames of any
type that have been received by this
Authenticator.
EapolFramesTx Number of EAPOL frames of any type
that have been transmitted by this
Authenticator.
EapolStartFramesRx Number of EAPOL Start frames that
have been received by this
Authenticator.
EapolLogoffFramesRx Number of EAPOL Logoff frames that
have been received by this
Authenticator.
EapolRespIdFramesRx Number of EAP Resp/Id frames that
have been received by this
Authenticator.
EapolRespFramesRx Number of valid EAP Response frames
(other than Resp/Id frames) that have
been received by this Authenticator.
EapolReqIdFramesTx Number of EAP Req/Id frames that have
been transmitted by this Authenticator.
EapolReqFramesTx Number of EAP Request frames (other
than Req/Id frames) that have been
transmitted by this Authenticator.
InvalidEapolFramesRx Number of EAPOL frames that have
been received by this Authenticator for
which the frame type is not recognized.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48