Cisco 300 Series User Manual

IPv6 First Hop Security
579 OL-32830-01 Command Line Interface Reference Guide
25
25.70 show ipv6 first hop security error
counters
To display global error counters, use the show ipv6 first hop security error
counters command in privileged EXEC mode.
Syntax
show ipv6 first hop security error counters
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
This command displays global error counters.
Examples
Example 1—The following examples displays global error counters:
switchxxxxxx# show ipv6 first hop security error counters
Neighbor Binding Table Overflow counter: 0
Neighbor Prefix Table Overflow counter: 0
TCAM Overflow counter: 0
25.71 show ipv6 first hop security policy
To display IPv6 First Hop Security policies on all ports configured with the IPv6
First Hop Security feature, use the show ipv6 first hop security policy command in
privileged EXEC mode.
Syntax
show ipv6 first hop security policy [
policy-name | active]

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48