Cisco 300 Series User Manual

ACL Commands
OL-32830-01 Command Line Interface Reference Guide 136
4
4.14 show time-range
Use the show time-range User EXEC mode command to display the time range
configuration.
Syntax
show time-range
time-range-name
Parameters
time-range-name—Specifies the name of an existing time range.
Command Mode
User EXEC mode
Example
switchxxxxxx> show time-range
http-allowed
--------------
absolute start 12:00 1 Jan 2005 end 12:00 31 Dec 2005
periodic Monday 12:00 to Wednesday 12:00
4.15 show access-lists
Use the show access-lists Privileged EXEC mode command to display access
control lists (ACLs) configured on the switch.
Syntax
show access-lists [
name ]
show access-lists
time-range-active [name]
Parameters
• name—Specifies the name of the ACL.(Range: 1-160 characters).

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48