Cisco 300 Series User Manual

IPv6 First Hop Security
577 OL-32830-01 Command Line Interface Reference Guide
25
Attached to VLAN 100
RA Guard Policy: policy1
Neighbor Bind Policy: policy2
Attached to port gi11 and VLAN 100
IPv6 First Hop Security Policy: FHSpolicy
ND Inspection Policy: policy1
RA Guard Policy: policy3
Neighbor Bind Policy: policy3
IPv6 Source Guard Policy: policy4
25.69 show ipv6 first hop security counters
To display information about the packets counted by the port counter, use the
show ipv6 first hop security counters command in privileged EXEC mode.
Syntax
show ipv6 first hop security counters interface
interface-id
Parameters
• interface interface-id —Displays counters for specified Ethernet port or port
channel.
Command Mode
Privileged EXEC mode
User Guidelines
This command displays packets handled by the switch that are being counted in
port counters. The switch counts packets captured per port and records whether
the packet was received, bridged, or dropped. If a packet is dropped, the reason
for the drop and the feature that caused the drop are both also provided.
Examples
The following examples displays information about packets counted on port gi11:
switchxxxxxx# show ipv6 first hop security counters interface gi11

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48