Cisco 300 Series User Manual

GARP VLAN Registration Protocol (GVRP) Commands
431 OL-32830-01 Command Line Interface Reference Guide
20
gi1 3 0 0 0 0 0
gi1 4 0 0 0 0 0
20.8 show gvrp statistics
To display GVRP statistics for all interfaces or for a specific interface, use the show
gvrp statistics EXEC mode command.
Syntax
show gvrp statistics
[interface-id]
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or Port-channel.
Default Configuration
All GVRP statistics are displayed.
Command Mode
User EXEC mode
Example
The following example displays GVRP statistical information.
switchxxxxxx# show gvrp statistics
GVRP statistics:
----------------
Legend:
rJE :
rEmp:
rLE :
sJE :
sEmp:
sLE :
Join Empty Received
Empty Received
Leave Empty Received
Join Empty Sent
Empty Sent
Leave Empty Sent
rJIn: Join In Received
rLIn: Leave In Received
rLA : Leave All Received
sJIn: Join In Sent
sLIn: Leave In Sent
sLA : Leave All Sent

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48