Cisco 300 Series User Manual

Macro Commands
OL-32830-01 Command Line Interface Reference Guide 694
32
switchxxxxxx(config)# macro name console-timeout
Enter macro commands one per line. End with the character ‘@’.
line console
exec-timeout $timeout-interval
@
switchxxxxxx(config)# macro global trace console-timeout $timeout-interval 100
Applying command… ‘line console’
Applying command… ‘exec-timeout 100’
32.5 macro global description
Use the macro global description Global Configuration command to enter a
description which is used to indicate which macros have been applied to the
switch. Use the no form of this command to remove the description.
Syntax
macro global description
text
no macro global description
Parameters
• text —Description text. The text can contain up to 160 characters.
Default Configuration
The command has no default setting.
Command Mode
Global Configuration mode
User Guidelines
When multiple global macros are applied to a switch, the global description text is
a concatenation of texts from a number of previously applied macros.
You can verify your settings by entering the show parser macro command with the
description keyword.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48