Cisco 300 Series User Manual

SSD Commands
933 OL-32830-01 Command Line Interface Reference Guide
47
Command Mode
Global Configuration mode.
Default
The command itself does not have a default. However, note that the read mode of
the session itself, defaults to the default read mode of the SSD rule that the device
uses to grant SSD permission to the user of the session.
User Guidelines
Use no ssd session read to restore the default read option of the SSD rules. This
configuration will be allowed only if the user of the current session has sufficient
read permissions; otherwise, the command will fail and an error will be displayed.
The setting will take effect immediately and will terminate when the user restores
the settings or exits the session.
Example
switchxxxxxx(config)# ssd session read plaintext
47.6 show ssd session
To view the SSD read permission and default read mode of the user of the current
session, use show ssd session in Privileged EXEC mode.
Syntax
show ssd session
Command Mode
Privileged EXEC mode
Default
None
Examples
switchxxxxxx# show ssd session
User Name/Level: James / Level 15

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48