Cisco 300 Series User Manual

Configuration and Image File Commands
259 OL-32830-01 Command Line Interface Reference Guide
10
The following example copies file1 to the Startup Configuration file. The username
and password used for SCP session authentication are: jeff and admin1. The IP
address of the server containing file1 is 102.1.2.2.
switchxxxxxx# copy scp://jeff:admin1@102.1.2.2/file1 startup-config
10.2 write
Use the write Privileged EXEC mode command to save the running configuration
to the startup configuration file.
Syntax
write [memory]
Parameters
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
Examples
The following example shows how to overwrite the startup-config file with the
running-config file with the write command.
switchxxxxxx# write
Overwrite file [startup-config] ?[Yes/press any key for no]....15-Sep-2010 11:27
:48 %COPY-I-FILECPY: Files Copy - source URL running-config destination URL
flash://startup-config
15-Sep-2010 11:27:50 %COPY-N-TRAP: The copy operation was completed successfully
Copy succeeded

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48