Cisco 300 Series

802.1X Commands
85 OL-32830-01 Command Line Interface Reference Guide
2
2.34 show dot1x users
Use the show dot1x users Privileged EXEC mode command to display active
802.1X
authorized users for the device.
Syntax
show dot1x users
[username username ]
Parameters
• username username —Specifies the supplicant username (Length: 1–160
characters).
Default Configuration
Display all users.
Command Mode
Privileged EXEC mode
Examples
The following commands displays all 802.1x users:
switchxxxxxx# show dot1x users
EapLengthErrorFramesR
x
Number of EAPOL frames that have
been received by this Authenticator in
which the Packet Body Length field is
invalid.
LastEapolFrameVersion Protocol version number carried in the
most recently received EAPOL frame.
LastEapolFrameSource Source MAC address carried in the
most recently received EAPOL frame.
Field Description