Cisco 300 Series

EEE Commands
383 OL-32830-01 Command Line Interface Reference Guide
17
Example 1 - The following displays brief Information about all ports.
switchxxxxxx# show eee
EEE globally enabled
EEE Administrate status is enabled on ports: gi11-2, gi14
EEE Operational status is enabled on ports: gi11-2, gi14
EEE LLDP Administrate status is enabled on ports: gi11-3
EEE LLDP Operational status is enabled on ports: gi11-2
Example 2 - The following is the information displayed when a port is in the Not
Present state; no information is displayed if the port supports EEE.
switchxxxxxx# show eee gi11
Port Status: notPresent
EEE Administrate status: enabled
EEE LLDP Administrate status: enabled
Example 3 - The following is the information displayed when the port is in status
DOWN.
switchxxxxxx# show eee gi11
Port Status: DOWN
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed
1G : EEE supported
EEE Administrate status: enabled
EEE LLDP Administrate status: enabled
Example 4 - The following is the information displayed when the port is in status
UP and does not support EEE.
switchxxxxxx# show eee gi12