Cisco 300 Series

EEE Commands
OL-32830-01 Command Line Interface Reference Guide 384
17
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed
1G : EEE supported
Current port speed: 1000Mbps
EEE Administrate status: enabled
EEE LLDP Administrate status: enabled
Example 5 - The following is the information displayed when the neighbor does
not support EEE.
switchxxxxxx# show eee gi14
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed
1G : EEE supported
Current port speed: 1000Mbps
EEE Remote status: disabled
EEE Administrate status: enabled
EEE Operational status: disabled (neighbor does not support)
EEE LLDP Administrate status: enabled
EEE LLDP Operational status: disabled
Example 6 - The following is the information displayed when EEE is disabled on the
port.
switchxxxxxx# show eee gi11
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed 1G: EEE supported