Cisco 300 Series

EEE Commands
385 OL-32830-01 Command Line Interface Reference Guide
17
Current port speed: 1000Mbps
EEE Administrate status: disabled
EEE Operational status: disabled
EEE LLDP Administrate status: enabled
EEE LLDP Operational status: disabled
Example 7 - The following is the information displayed when EEE is running on the
port, and EEE LLDP is disabled.
switchxxxxxx# show eee gi12
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported
Speed 100M: EEE supported
Speed 1G: EEE supported
Current port speed: 1000Mbps
EEE Remote status: enabled
EEE Administrate status: enabled
EEE Operational status: enabled
EEE LLDP Administrate status: disabled
EEE LLDP Operational status: disabled
Resolved Tx Timer: 10usec
Local Tx Timer: 10 usec
Resolved Timer: 25 usec
Local Rx Timer: 20 usec
Example 8 - The following is the information displayed when EEE and EEE LLDP are
running on the port.
switchxxxxxx# show eee gi13
Port Status: UP
EEE capabilities:
Speed 10M: EEE not supported