Cisco 300 Series User Manual

Voice VLAN Commands
OL-32830-01 Command Line Interface Reference Guide 1092
57
Using this command with the type parameter displays the voice VLAN parameters
relevant to the type selected. The the local and agreed voice VLAN settings are
displayed only if this is the current voice VLAN state.
The interface-id parameter is relevant only for the OUI VLAN type.
Examples
The following examples display the output of this command in various
configurations.
Example 1—Displays the auto voice VLAN parameters (this is independent of the
voice VLAN state actually enabled).
switch> show voice vlan type auto
switchxxxxxx# show voice vlan type auto
Best Local Voice VLAN-ID is 5
Best Local VPT is 5 (default)
Best Local DSCP is 46 (default)
Agreed Voice VLAN is received from switch 00:24:01:30:10:00
Agreed Voice VLAN priority is 0 (active static source)
Agreed Voice VLAN-ID is 5
Agreed VPT is 5
Agreed DSCP is 46
Agreed Voice VLAN Last Change is 11-Jul-11 15:52:51
switchxxxxxx#
Example 2— Displays the current voice VLAN parameters when the voice VLAN state
is auto-enabled.
switch> show voice vlan
Administrate Voice VLAN state is auto-enabled on IPv4
Operational Voice VLAN state is auto-enabled
Best Local Voice VLAN-ID is 5
Best Local VPT is 5 (default)
Best Local DSCP is 46 (default)
Agreed Voice VLAN is received from switch 00:24:01:30:10:00

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48