Cisco 300 Series

Configuration and Image File Commands
OL-32830-01 Command Line Interface Reference Guide 262
10
Syntax
more
url
Parameters
• url —Specifies the location URL or reserved keyword of the source file to be
displayed. (Length: 1–160 characters).
Default Configuration
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The following keywords and URL prefixes are supported
• flash://—URL of the FLASH file.
• startup-config—Startup configuration file.
• WORD—Name of file (e.g. backup-config).
Files are displayed in ASCII format, except for the images, which are displayed in a
hexadecimal format.
*.prv files cannot be displayed.
Example
The following example displays the running configuration file contents.
switchxxxxxx# more running-config
no spanning-tree
interface range gi11-4
speed 1000
exit
no lldp run
line console
exec-timeout 0