IPv6 Prefix List Commands
OL-32830-01 Command Line Interface Reference Guide 604
26
count: 1, range entries: 0
seq 5 permit 2002::/16 (hit count: 313)
ipv6 prefix-list aggregate:
count: 3, range entries: 2
seq 5 deny 3FFE:C00::/24 ge 25 (hit count: 568)
seq 10 description The Default Action
seq 15 permit ::/0 le 48 (hit count: 31310)
ipv6 prefix-list bgp-in:
count: 6, range entries: 3
seq 5 deny 5F00::/8 le 128 (hit count: 0)
seq 10 deny ::/0 (hit count: 0)
seq 15 deny ::/1 (hit count: 0)
seq 20 deny ::/2 (hit count: 0)
seq 25 deny ::/3 ge 4 (hit count: 0)
seq 30 permit ::/0 le 128 (hit count: 240664)
Field Descriptions
• count—Number of entries in the list.
• range entries—Number of entries with matching range.
• seq—Entry number in the list.
• permit, deny—Granting status.
• description—Comment.
• hit count—Number of matches for the prefix entry.
Example 2. The following example shows the output of the show ipv6 prefix-list command with the
summary keyword:
switchxxxxxx#
show ipv6 prefix-list summary
ipv6 prefix-list 6to4:
count: 1, range entries: 0
ipv6 prefix-list aggregate:
To Next Page
Loading...
