Cisco 300 Series User Manual

Link Layer Discovery Protocol (LLDP) Commands
673 OL-32830-01 Command Line Interface Reference Guide
30
Examples
Example 1 - The following example displays information about neighboring
devices discovered using LLDP on all ports on which LLDP is enabled and who are
up.
Location information, if it exists, is also displayed.
switchxxxxxx# show lldp neighbors
System capability legend:
B - Bridge; R - Router; W - Wlan Access Point; T - telephone;
D - DOCSIS Cable Device; H - Host; r - Repeater;
TP - Two Ports MAC Relay; S - S-VLAN; C - C-VLAN; O - Other
Port Device ID Port ID System Name Capabilities TTL
----- --------------- -------- ---------- ----------- ----
gi11 00:00:00:11:11:11 gi11 ts-7800-2 B 90
gi11 00:00:00:11:11:11 gi11 ts-7800-2 B 90
gi12 00:00:26:08:13:24 gi13 ts-7900-1 B, R 90
gi13 00:00:26:08:13:24 gi12 ts-7900-2 W 90
Example 2 - The following example displays information about neighboring
devices discovered using LLDP on port 1.
switchxxxxxx# show lldp neighbors gi11
Device ID: 00:00:00:11:11:11
Port ID: gi11
System Name: ts-7800-2
Capabilities: B
System description:
Port description:
Management address: 172.16.1.1
Time To Live: 90 seconds
802.3 MAC/PHY Configuration/Status
Auto-negotiation support: Supported.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48