Cisco 300 Series User Manual

Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide 676
30
Capabilities The capabilities discovered on the neighbor
device. Possible values are:
B - Bridge
R - Router
W - WLAN Access Point
T - Telephone
D - DOCSIS cable device
H - Host
r - Repeater
O - Other
System description The neighbor device’s system description.
Port description The neighbor device’s port description.
Management
address
The neighbor device’s management address.
Auto-negotiation
support
The auto-negotiation support status on the
port. (supported or not supported)
Auto-negotiation
status
The active status of auto-negotiation on the
port. (enabled or disabled)
Auto-negotiation
Advertised
Capabilities
The port speed/duplex/flow-control
capabilities advertised by the
auto-negotiation.
Operational MAU
type
The port MAU type.
LLDP MED
Capabilities The sender's LLDP-MED capabilities.
Device type The device type. Indicates whether the
sender is a Network Connectivity Device or
Endpoint Device, and if an Endpoint, to which
Endpoint Class it belongs.
LLDP MED - Network Polic
Application type The primary function of the application
defined for this network policy.
Field Description

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48