Cisco 300 Series

Macro Commands
OL-32830-01 Command Line Interface Reference Guide 696
32
Total number of macros = 6
--------------------------------------------------------------
Macro name : company-global
Macro type : default global
# Enable dynamic port error recovery for link state
# failures
--------------------------------------------------------------
Macro name : company-desktop
Macro type : default interface
# macro keywords $AVID
# Basic interface - Enable data VLAN only
# Recommended value for access vlan (AVID) should not be 1
switchport access vlan $AVID
switchport mode access
Example 2 - This is an example of output from the show parser macro name
command.
switchxxxxxx# show parser macro standard-switch10
Macro name : standard-switch10
Macro type : customizable
macro description standard-switch10
# Trust QoS settings on VOIP packets
auto qos voip trust
# Allow port channels to be automatically formed
channel-protocol pagp
Example 3 - This is an example of output from the show parser macro brief
command.
switchxxxxxx# show parser macro brief
default global : company-global