EasyManuals Logo

Cisco 300 Series User Manual

Cisco 300 Series
1117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #807 background imageLoading...
Page #807 background image
Remote Network Monitoring (RMON) Commands
807 OL-32830-01 Command Line Interface Reference Guide
41
The following table describes the significant fields displayed.
Field Description
Dropped Total number of events in which packets were dropped by the
probe due to lack of resources. Note that this number is not
necessarily the number of packets dropped. It is the number of
times this condition was detected.
Octets Total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS
octets).
Packets Total number of packets (including bad packets, broadcast
packets, and multicast packets) received.
Broadcast Total number of good packets received and directed to the
broadcast address. This does not include multicast packets.
Multicast Total number of good packets received and directed to a multicast
address. This number does not include packets directed to the
broadcast address.
CRC Align
Errors
Total number of packets received with a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but with either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).
Collisions Best estimate of the total number of collisions on this Ethernet
segment.
Undersize
Pkts
Total number of packets received, less than 64 octets long
(excluding framing bits, but including FCS octets) and otherwise
well formed.
Oversize Pkts Total number of packets received, longer than 1518 octets
(excluding framing bits, but including FCS octets) and otherwise
well formed.
Fragments Total number of packets received, less than 64 octets in length
(excluding framing bits but including FCS octets) and either a bad
Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
Jabbers Total number of packets received, longer than 1518 octets
(excluding framing bits, but including FCS octets), and either a bad
Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
64 Octets Total number of packets (including bad packets) received that are
64 octets in length (excluding framing bits but including FCS
octets).

Table of Contents

Other manuals for Cisco 300 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 300 Series and is the answer not in the manual?

Cisco 300 Series Specifications

General IconGeneral
ModelCisco 300 Series
CategorySwitch
DimensionsVaries by model
WeightVaries by model
Power over Ethernet (PoE)Available on select models
ManagementWeb-based GUI, SNMP, CLI
VLANsUp to 256
Security FeaturesACLs, 802.1X, Port Security
Humidity10% to 90% non-condensing
Ports8, 16, 24, 48

Related product manuals