H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-4
z RIP view
z OSPF view
z OSPF area view
z Routing policy view
z Basic ACL view
z Advanced ACL view
z Layer 2 ACL view
z User-defined ACL view
z QoS profile view
z RADIUS scheme view
z ISP domain view
z HWPing view
z HWTACACS view
z MSDP view
z PoE profile view
Table 1-4 lists operations you can perform in these CLI views and details about
commands used to enter these CLI views.
Table 1-4 Operations in CLI views
View
Available
operation
Prompt Enter method Quit method
User view
Display
operation
status and
statistical
information
<H3C>
Enter user view
once logging in
to the switch.
Execute the quit
command in user
view to log out of the
switch.
System
view
Configure
system
parameters
[H3C]
Execute the
system-view
command in
user view.
Execute the quit or
return command to
return to user view.
[H3C-Ether
net1/0/1]
100M Ethernet
interface view
Execute the
interface
ethernet 1/0/1
command in
system view.
Ethernet
interface
view
Configure
Ethernet
interface
parameters
[H3C-Gigab
itEthernet1/
1/1]
Gigabit
Ethernet
interface view
Execute the
interface
gigabitetherne
t 1/1/1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English