H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-5
View
Available
operation
Prompt Enter method Quit method
VLAN
view
Configure
VLAN
parameters
[H3C-vlan1]
Execute the
vlan 1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
VLAN
interface
view
Configure IP
interface
parameters
for VLANs
and
aggregated
VLANs
[H3C-Vlan-i
nterface1]
Execute the
interface
vlan-interface
1 command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
Loopback
interface
view
Configure
loopback
interface
parameters
[H3C-Loop
Back0]
Execute the
interface
loopback 0
command in
system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
Local user
view
Configure
local user
parameters
[H3C-luser-
user1]
Execute the
local-user
user1
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
User
interface
view
Configure
user
interface
parameters
[H3C-ui0]
Execute the
user-interface
0 command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
FTP client
view
Configure
FTP client
parameters
[ftp]
Execute the ftp
command in
user view.
Execute the quit
command to return
to user view.
SFTP
client view
Configure
SFTP client
parameters
sftp-client>
Execute the
sftp 10.1.1.1
command in
system view.
Execute the quit
command to return
to user view.
MST
region
view
Configure
MST region
parameters
[H3C-mst-r
egion]
Execute the
stp
region-config
uration
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English