H3C S3600 Series User Manual

Operation Manual – CLI
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
CLI Configuration
1-6
View
Available
operation
Prompt Enter method Quit method
Cluster
view
Configure
cluster
parameters
[H3C-cluste
r]
Execute the
cluster
command in
system view.
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
Public key
view
Configure
RSA public
keys for SSH
users
[H3C-rsa-p
ublic-key]
Execute the
rsa
peer-public-ke
y a003
command in
system view.
Execute the
peer-public-key
end command to
return to system
view.
Public key
code view
Edit RSA
public key for
SSH users
[H3C-rsa-ke
y-code]
Execute the
public-key-co
de begin
command in
public key code
view
Execute the
public-key-code
end command to
return to public key
view
DHCP
address
pool view
Configure
DHCP
address pool
parameters
[H3C-dhcp-
pool-a123]
Execute the
dhcp server
ip-pool a123
command in
system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
PIM view
Configure
PIM
parameters
[H3C-pim]
Execute the
pim command
in system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
RIP view
Configure
RIP
parameters
[H3C-rip]
Execute the rip
command in
system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.
OSPF
view
Configure
OSPF
protocol
parameters
[H3C-ospf-1
]
Execute the
ospf command
in system view
Execute the quit
command to return
to system view.
Execute the return
command to return
to user view.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English