H3C S3600 Series User Manual

Operation Manual – Login
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 2 Logging in through the Console Port
2-13
Operation Command Description
Create a local user
(Enter local user view.)
local-user user-name
Required
No local user exists by default.
Set the authentication
password for the local
user
password { simple |
cipher } password
Required
Specify the service
type for AUX users
service-type terminal
[ level level ]
Required
Quit to system view
quit
—
Enter AUX user
interface view
user-interface aux 0
—
Configure to
authenticate users
locally or remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
Users are authenticated locally
by default.
Set the
baud rate
speed speed-value
Optional
The default baud rate of the
AUX port (also the Console
port) is 9,600 bps.
Set the
check
mode
parity { even | none |
odd }
Optional
By default, the check mode of a
Console port is set to none, that
is, no check bit.
Set the
stop bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a
Console port is 1.
Configure
the
Console
port
Set the
data bits
databits { 7 | 8 }
Optional
The default data bits of a
Console port is 8.
Configure the
command level
available to users
logging into the user
interface
user privilege level
level
Optional
By default, commands of level 3
are available to users logging
into the AUX user interface.
Make terminal services
available to the user
interface
shell
Optional
By default, terminal services are
available in all user interfaces.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English