H3C S3600 Series User Manual

Operation Manual – SNMP-RMON
H3C S3600 Series Ethernet Switches-Release 1510 Chapter 1
SNMP Configuration
1-4
Operation Command Description
Set system information
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c |
v3 }* | all } }
Required
By default, the contact
information for system
maintenance is "R&D
Hangzhou, H3C
Technologies
Co.,Ltd.", the system
location is "Hangzhou
China", and the
SNMP version is
SNMPv3.
Direct
configu
ration
Set a
commun
ity name
snmp-agent
community { read |
write } community-name
[ acl acl-number |
mib-view view-name ]*
Set an
SNMP
group
snmp-agent group { v1
| v2c } group-name
[ read-view read-view ]
[ write-view write-view ]
[ notify-view
notify-view ] [ acl
acl-number ]
Set a
communi
ty name
and
access
permissi
on
Indirect
configu
ration
Add a
user to
an
SNMP
group
snmp-agent usm-user
{ v1 | v2c } user-name
group-name [ acl
acl-number ]
Required
z You can set an
SNMPv1/SNMPv2
C community
name through
direct
configuration.
z Indirect
configuration is
compatible with
SNMPv3. The
added user is
equal to the
community name
for SNMPv1 and
SNMPv2C.
z You can choose
either of them as
needed.
Set the maximum SNMP
packet size for SNMP agent
snmp-agent packet
max-size byte-count
Optional
By default, the
maximum SNMP
packet size is 1,500
bytes.
Set the device engine ID
snmp-agent
local-engineid engineid
Optional
By default, the device
engine ID is formed by
appending device
information to the
enterprise number.
Create/Update the view
information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Optional
By default, the view
name is “ViewDefault”
and OID is 1.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English