iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
88
3.3.5.5 DISA Service – PGM 146
DISA Service can be enabled on CO lines based on the system operation mode (Day, Night, and
Timed). DISA calls may be routed to dial tone and await user dialing (simple routing) or through a
multi-layered Audio Text menu assigning a VSF Announcement/Customer Call Route (CCR)
Table Index. The system can be instructed to disconnect after the announcement or follow the
CCR Table routing with a user-recorded announcement requesting specific inputs from the user.
PROCEDURE:
DISA ATTRIBUTES
ENTER COL RANGE
1. Press the [PGM] button and dial 146.
01-02 DISA ATTRIBUTE
F1:DAY F2:NIGHT F3:TIME
Use the dial-pad to enter the CO Line range. For a single
CO Line, enter the same number twice.
001-002 DISA ATTRIBUTE
DAY SERVICE 00 (00 – 71)
Select the desired Flex button:
Button 1: Day
Button 2: Night
Button 3: Timed
Use the dial-pad to enter the desired VSF AA
Announcement, (00: disabled, 01~70 CCR Table index PGM
228, or 71: await user digits). Enter ‘#’ after the entry to
include a “drop after announcement instruction”.
Press the [Save] button to store the data entry.
To Next Page
Loading...
