iPECS UCP - Network Feature Code Table

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
519
4.4.10.7 Network Feature Code Table - PGM 325
Selecting Network Feature Code Table returns the data entry page. Click [Save] button after
changing Value.
Figure 4.4.10.7-1 Network Feature Code Table
Table 4.4.10.7-1 NETWORK FEATURE CODE TABLE
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Net Feature Code
Digit sequence or code used to activate special Network
Features.
16 digits None
Net Feature type
Each Network Feature Code is assigned to activate a feature
in the destination system.
N/A,
Internal Page,
External Page,
All Call Page,
Net Door Open,
Conference
Room,
Call Park,
N/A
In case of eMG80, the value range is as below:
Internal page: 1-35, External page (1), All Call page (1-3: 1(INT), 2(EXT), 3(ALL)), Net door Open
(1-2), Conference Room (1-9), Call Park (1-19)
In case of eMG800, the value range is as below:
Internal page: 1-100, External page (1), All Call page (1-3: 1(INT), 2(EXT), 3(ALL)), Net door
Open (1-2), Conference Room (1-9), Call Park (1-200)