iPECS UCP - Voice Mail USB Backup

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
604
4.5.13.2 Voice Mail USB Backup
Selecting Voice Mail Backup displays the page shown in figure.
In case of eMG, this page permits the Administrator to send all Voice messages in the
VMIU/VMIB memory to the USB port of the KSU. Note the VSF must be idle and a USB memory
device installed in the system.
The eMG800 has only [Backup Voice Mail to USB (VMIU)].
In case of UCP, this page permits the Administrator to send all Voice messages in the VSF
gateway memory to the USB port of the UCP module. Note the VSF gateway must be idle and a
USB memory device installed in the UCP module.
UCP2400 doesn’t support Voice mail USB Backup.
Figure 4.5.13.2-1 Voice Mail USB Backup
To back up Voice Mail, click the backup Voice Mail to USB button. User can find all information
about the status, Number of files, Total file size, and the percentage of Progress by text.