iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
222
Figure 4.2-1 iPECS eMG80 & eMG800 & UCP600 Home page
For reference, we explain Admin and Maintenance based on UCP600. The home page is
displayed according to eMG80, eMG800 & UCP type (UCP100, UCP600, UCP2400).
To access User portal, the user must enter Station number and full Authorization code
(station number and Auth code) as defined in Tables Data – Station Authorization Codes (PGM
227). The system will go to the user portal Main page as below. For detail information, refer to
“User Portal User Guide” provided.
Figure 4.2-2 iPECS User Portal main page
To Next Page
Loading...
