iPECS UCP - Pick-Up Group Attributes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
421
Figure 4.4.6.3-5 Pick-Up Group Attributes
Table 4.4.6.3-5 PICK-UP GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Auto Pick Up
If a group member is ringing, other members of
the Group can Pick-Up the ringing call by simply
going “Off-hook”.
OFF
ON
OFF
All Ring
When a call is offered to a member of the Pick-Up
Group in the Tone Ring mode, all members will
ring. Note Auto Pickup above must be “ON”.
OFF
ON
OFF