iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
618
Appendix A Program Codes
User and Attendant Program Codes, refer to Table A-1 and A-2, are digit sequences users and
the Attendant may dial while in the User Program Mode to assign Flex buttons and affect the
status of a feature or setting. For more information on the User Program Mode, refer to the iPECS
Features and Operation Manual.
Many of these codes may be assigned to a button of an iPECS IP or LDP Phone by pressing the
[PGM] button as the first entry of a Flexible button assignment, see Flex button Programming in
the iPECS Features and Operation Manual.
Table A-1 Station User Program codes
To Next Page
Loading...
