iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
620
Appendix B Flexible Numbering Plan
(Web based)
The System Numbering Plan can be selected from 1 of 9 basic Numbering Plans. Table B-1
provides a brief description of the plans and Table B-2 for eMG and Table B-3 for UCP provide
the Numbering Plan codes for each of the nine basic plans. The Number Plan is selected in
Program 100 and individual codes in the plan can be changed using the Flexible Numbering Plan
Programs 106 to 109.
Table B-1 Numbering Plan Description
Plan Number Description eMG80 eMG800 UCP
1000 – 3399
The station number can be within 799
1000 – 3399
2000– 4399
1000 – 3399
1000 – 3399
Table B-2 eMG Basic Numbering Plan 1-4, Default Values
Feature
Basic Numbering Plan
1 2 3 4 Remark
Intercom Call for eMG800
1000-2199
1000-
1000-
1000-
1 Internal Page Zone
eMG80:301~335
*301~*335 *101~*135 #101~#135
All Call Page (Internal/External)
Do Not Disturb (Toggle On/Off)
Activate Message Wait/Callback
Message Wait/Callback Answer