iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
362
4.4.5.6 DISA COS - PGM 166
Selecting DISA COS will display the DISA COS data entry page. Click [Save] button after
changing Value.
Figure 4.4.5.6-1 DISA COS
A DISA user is subject to the dialing restrictions assigned in the DISA Class-of-Service (COS).
The restrictions applied are the same as with the corresponding Station COS levels 1~11 and
interact with the CO/IP COS in the same manner. An assignment is made for Day, Timed and
Night Ring mode of system operation. The default for all three modes (Day, Night, Timed ring) of
DISA COS is 7, allowing internal calls only.
To Next Page
Loading...
