iPECS UCP - 2.30.4 Walking COS (Class of Service)

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
90
3.3.5.7 CO Additional Attributes – PGM 148
CID Attributes are assigned for Analog CO Line Caller Id services.
PROCEDURE:
CO ADDITIONAL ATTR
ENTER COL RANGE
1. Press the [PGM] button and dial 163.
01–02 CID SETTING
PRESS FLEX_KEY (01–13)
Use the dial–pad to enter a CO line range. For a single
CO Line, enter the same number twice.
Press the desired Flex button; refer to Table 3.3.5.7-1.
Use the dial–pad to enter desired data for the Attribute.
Press the [Save] button to store the data entry.
Table 3.3.5.7-1 CO Additional Attributes (PGM 148)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
01–02 CID MODE SELECT
(0–4) : FSK
CID signal type can be
assigned according to the
CID type PSTN provides.
0: Disabled
1: FSK
2 : DTAS FSK
3: DTMF
4: Russia CID
FSK
2
01-02 RCID DETECT
(1: ALL/0: LOCAL) : ALL
Russia CID Detect Mode. 0: LOCAL
1: ALL
ALL
3
01-02 RCID REQUEST
(1: AUTO/0: USER) : AUTO
Russia CID Request Mode. 0: USER
1: AUTO
AUTO
4
01-02 RCID REQ TMR(10ms)
(010–150) : 030
Russia CID First Delay
Timer.
010–150
(10msec)
030
5
01-02 RCID NOANS TMR(s)
(001–300) : 020
Russia CID NO–Answer
Timer.
001–300 (sec) 020
6
01-02 RCID DGT NUMBER
(04–10) : 07
Russia CID Digit Number. 04–10 07
7
01-02 RCID REQ COUNT
(1–3) : 1
Russia CID Request Count. 1–3 1
8
01-02 RCID REQ DELAY
(10–30) : 10 (10ms)
Russia CID Retry Delay
Timer.
10–30
(10msec)
10
9
01-02 CC BLOCKING
(0-2): DISABLED
It’s for only Brazil R2, it
blocks for collect call if
double answer or with
indication is selected.
0: Disabled
1: Double
Answer
2: With
Indicator
Disabled