iPECS UCP - DECT Multi-Zone Support

To Next Page

To Previous Page

iPECS eMG80 & eMG800 & UCP

Administration and Programming Manual Issue 1.6

566

4.4.16.3 DECT Multi-zone support

Selecting the DECT Multi-zone support will display the DECT Multi-zone support input page. Click

[Save and All WTIM (WTIB)s reset] button after changing Value to apply.

Figure 4.4.16.3-1 DECT Multi-zone support attributes

It is for roaming of DECT phones in large sites with more than 3 WTIM (WTIB).

Other manuals for iPECS UCP