iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
593
4.5.9 VSF Prompt Upload
iPECS sytem delivers system prompts in up to six (6) languages. The prompts for each language
are stored in a separate file. Files for each of the languages supported are available from the
local Ericsson-LG Enterprise representative. The entire prompt file or individual prompts may be
uploaded to the system. Once uploaded to the system the file is employed to play prompts to
iPECS eMG/UCP user.
UCP2400 doesn’t support VSF prompt message.
VSF prompt sub-menu is a little different among eMG80, eMG800, and UCP.
Prompt selection: eMG800 and UCP are available.
Prompt Upload /Delete: Available.
Individual upload: Available.
4.5.9.1 Prompt selection
Selecting Prompt Selection displays the page shown in figure. The System Voice Prompt
language files are stored in the VSF memory and are enabled with the Prompt Selection page. A
reference “Position” is assigned a language selected from the drop-down menu. Once the
language for each position is selected, saving the page enables all the languages selected.
Figure 4.5.9.1-1 Prompt Selection for eMG800 & UCP
To Next Page
Loading...
