iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
509
4.4.9.21 Preset Flexible Button Default – PGM 240
Selecting Preset flexible button default will display the below page. Click [Save] button after
changing Value.
Figure 4.4.9.21-1 Preset Flexible Button Default
Administrator can assign Preset flexible button table to the station automatically by default.
Before connecting the station, administrator has to set this table according to Priority, Station
Type, the number of Button, Station Range, and check the preset Index (1~30). The preset index
means the range of Flexible Button Default Table (PGM 239).
To Next Page
Loading...
