iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
18
3.2 Data Entry Mode
Limited data entry can be accomplished from an Admin Station or station assigned for data entry
(Station Attributes III PGM 113, Flex button 1). After initialization and registration, any enabled
iPECS IP or LDP Phone may access the system database. In addition, as default, there is no
Station Admin password defined. To enter the Program mode from the Admin Station follow the
procedure below. In the left column of the chart are the LCD displays and in the right column are
step-by-step instructions to modify database items.
PROCEDURE:
STATION 100 (T)
04 SEP 01 02:49 PM
1. Press the [PGM] button.
Dial ‘*‘ and ‘#’.
ENTER ADMIN PASSWORD
Enter the Admin password. Confirmation tone is received. As
a default there is no password and this step is skipped.
ADMIN PROGRAM START
ENTER PGM NUMBER
To select a program, use the instructions in the following
sections, starting with “Press the [PGM] button” and dial the
specified Admin Program code.
To Next Page
Loading...
