iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
188
Table 3.3.9.11-1 MAC REGISTRATION (PGM 235)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
3
TBL 1: DEVICE ID
DEVICE ID : ....
Enter device ID when it has multiple
device ID in Board/Gateway.
0-255 0 (N/A)
3.3.9.12 Mobile Extension Table – PGM 236
A mobile phone can be used in conjunction with an iPECS Phone. The Mobile phone can access
system resources available to the user‘s wired phone and will receive ring for incoming iPECS
calls. The user may be allowed to enable the Mobile extension and define the mobile number.
The system can be defined to employ a specific CO/IP Line Group to place calls to the Mobile
phone.
The Mobile Extension Table also defines Notification of new VSF messages. When a new
message is received for a user in the VSF, the system will call the assigned ‘Tel Number’
notifying the user of the new message.
PROCEDURE:
MOBILE EXTENSION TABLE
ENTER STA NUMBER
1. Press the [PGM] button and dial 236 and enter STA
number (Ex.100).
100 : MOBIL EXT ATTR
PRESS FLEX KEY (01-14)
Use the dial-pad to enter the desired station number.
Press the Flex button for the desired item; refer to Table
Use the dial-pad to enter the required data.
Press the [Save] button to store the data entry.
Table 3.3.9.12-1 MOBILE EXTENSION (PGM 236)
BTN ATTRIBUTE/DISPLAY DESCRIPTION RANGE DEFAULT
1
100 : PGM AUTHORITY
(1:ON/0:OFF) : OFF
The user may be allowed to activate
the mobile extension feature.
0: OFF
1: ON
OFF
2
100 : USAGE
DISABLE (0 -2)
Mobile extension feature can be
enabled and Fail Over to Mobile
extension can be included
0: DISABLE
1: MOBILE
EXT
DISABLE
3
100 : ACCESS CO GRP
CO GRP : 01
CO group used to call (ring) the
mobile extension.
eMG80:1-21
eMG800:1~201
01
To Next Page
Loading...
