iPECS UCP - VSF Group Attributes

iPECS eMG80 & eMG800 & UCP
Administration and Programming Manual Issue 1.6
422
Figure 4.4.6.3-6 VSF Group Attributes
Table 4.4.6.3-6 VSF GROUP ATTRIBUTES
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Retention Time (day)
When voice messages are stored in the VSF, the
system will maintain (store) the message for the
maximum number of days set in this program (0 to
99 days). (Not used)
00-99
(day)
0
Dial Time Out (sec)
This timer determines the inter-digit time for a
VSF-AA or a VM session. If this timer expires
while the VSF AA or VM is awaiting user input, the
system will assume the remote party has
disconnected and will return the channel to idle.
00-99
(seconds)
15
Group Name A group name can be designated.
Max. 12
characters